Post pobrano z: ::before vs :before

Note the double-colon ::before versus the single-colon :before. Which one is correct?

Technically, the correct answer is ::before. But that doesn’t mean you should automatically use it.

The situation is that:

• double-colon selectors are pseudo-elements.
• single-colon selectors are pseudo-selectors.

::before is definitely a pseudo-element, so it should use the double colon.

The distinction between a pseudo-element and pseudo-selector is already confusing. Fortunately, ::after and ::before are fairly straightforward. They literally add something new to the page, an element.

But something like ::first-letter is also a pseudo-element. The way I reason that out in my brain is that it’s selecting a part of something in which there is no existing HTML element for. There is no <span> around that first letter you’re targeting, so that first letter is almost like a new element you’re adding on the page. That differs from pseudo-selectors which are selecting things that already exist, like the :nth-child(2) or whatever.

Even though ::before is a pseudo-element and a double-colon is the correct way to use pseudo-elements, should you?

There is an argument that perhaps you should use :before, which goes like this:

1. Internet Explorer 8 and below only supported :before, not ::before
2. All modern browsers support it both ways, since tons of sites use :before and browsers really value backwards compatibility.
3. Hey it’s one less character as a bonus.

I’ve heard people say that they have a CSS linter that requires (or automates) them to be single-colon. Personally, I’m OK with people doing that. Seems fine. I’d value consistency over which way you choose to go.

On the flip side, there’s an argument for going with ::before that goes like this:

1. Single-colon pseudo-elements were a mistake. There will never be any more pseudo-elements with a single-colon.
2. If you have the distinction straight in your mind, might as well train your fingers to do it right.
3. This is already confusing enough, so let’s just follow the correctly specced way.

I’ve got my linter set up to force me to do double-colons. I don’t support Internet Explorer 8 anyway and it feels good to be doing things the „right” way.

The post ::before vs :before appeared first on CSS-Tricks.

Post pobrano z: A Basic WooCommerce Setup to Sell T-Shirts

WooCommerce is a powerful eCommerce solution for WordPress sites. If you’re like me, and like working with WordPress and have WordPress-powered sites already, WooCommerce is a no-brainer for helping you sell things online on those sites. But even if you don’t already have a WordPress site, WooCommerce is so good I think it would make sense to spin up a WordPress site so you could use it for your eCommerce solution.

Personally, I’ve used WooCommerce a number of times to sell things. Most recently, I’ve used it to sell T-Shirts (and hats) over on CodePen. We use WordPress already to power our blog, documentation, and podcast. Makes perfect sense to use WordPress for the store as well!

What I think is notable about our WooCommerce installation at CodePen is how painless it was, while doing everything we need it to do. I’d say it was a half-day job with maybe a half-day of maintenance every few months, partially based on us wanting to change something.

The first step is installing the plugin, and immediately you get a Products post type you can use to add new products. We’re selling a T-Shirt, so that looks like this:

What is somewhat astounding about WooCommerce is that you might need to do very little else. You could set a price, flip on the basic PayPal integration and enter your email, publish the product, and start taking orders.

Or, you could start customizing things and do as much or as little as you want:

• You could add as many different payment processors as you like. We like using Stripe for credit card processing at CodePen, but also offer PayPal.
• You could customize the template of every different page involved, or just use the defaults. At CodePen we have very lightly customized templates for the store homepage and product page.
• You could get very detailed with calculating shipping costs, or use flat rates. We use a flat rate shipping cost at CodePen almost as marketing: same shipping cost anywhere in the world!
• You could get into integrations, like connecting it with your MailChimp account for further email marketing or Slack account to notify your team of sales.

If you can dream it, you can do it with WooCommerce.

At CodePen, we work with a company called RealThread that actually prints and ships the T-Shirts.

They work great with WooCommerce of course, and the way we set that up is that we use the ShipStation integration and blast the orders into their account there and they handle all the fulfillment from there. There are all sorts of shipping method plugins though for anything you can think of.

Within WooCommerce, we have a dashboard of all the orders, their status, and even tracking information should we need to look something up.

So essentially:

1. We use WooCommerce
2. We use the Stripe plugin to take our credit card payments that way
3. We use the PayPal plugin to take PayPal payments over Braintree
4. We use the ShipStation plugin to send orders to that system for our fulfillment company to handle

It was quite easy to set up and works great, and it’s comforting to know that we could do tons more with it if we needed to and support is there to help.

The post A Basic WooCommerce Setup to Sell T-Shirts appeared first on CSS-Tricks.

Post pobrano z: ::before vs :before

Note the double-colon ::before versus the single-colon :before. Which one is correct?

Technically, the correct answer is ::before. But that doesn’t mean you should automatically use it.

The situation is that:

• double-colon selectors are pseudo-elements.
• single-colon selectors are pseudo-selectors.

::before is definitely a pseudo-element, so it should use the double colon.

The distinction between a pseudo-element and pseudo-selector is already confusing. Fortunately, ::after and ::before are fairly straightforward. They literally add something new to the page, an element.

But something like ::first-letter is also a pseudo-element. The way I reason that out in my brain is that it’s selecting a part of something in which there is no existing HTML element for. There is no <span> around that first letter you’re targeting, so that first letter is almost like a new element you’re adding on the page. That differs from pseudo-selectors which are selecting things that already exist, like the :nth-child(2) or whatever.

Even though ::before is a pseudo-element and a double-colon is the correct way to use pseudo-elements, should you?

There is an argument that perhaps you should use :before, which goes like this:

1. Internet Explorer 8 and below only supported :before, not ::before
2. All modern browsers support it both ways, since tons of sites use :before and browsers really value backwards compatibility.
3. Hey it’s one less character as a bonus.

I’ve heard people say that they have a CSS linter that requires (or automates) them to be single-colon. Personally, I’m OK with people doing that. Seems fine. I’d value consistency over which way you choose to go.

On the flip side, there’s an argument for going with ::before that goes like this:

1. Single-colon pseudo-elements were a mistake. There will never be any more pseudo-elements with a single-colon.
2. If you have the distinction straight in your mind, might as well train your fingers to do it right.
3. This is already confusing enough, so let’s just follow the correctly specced way.

I’ve got my linter set up to force me to do double-colons. I don’t support Internet Explorer 8 anyway and it feels good to be doing things the „right” way.

The post ::before vs :before appeared first on CSS-Tricks.

Post pobrano z: A Basic WooCommerce Setup to Sell T-Shirts

WooCommerce is a powerful eCommerce solution for WordPress sites. If you’re like me, and like working with WordPress and have WordPress-powered sites already, WooCommerce is a no-brainer for helping you sell things online on those sites. But even if you don’t already have a WordPress site, WooCommerce is so good I think it would make sense to spin up a WordPress site so you could use it for your eCommerce solution.

Personally, I’ve used WooCommerce a number of times to sell things. Most recently, I’ve used it to sell T-Shirts (and hats) over on CodePen. We use WordPress already to power our blog, documentation, and podcast. Makes perfect sense to use WordPress for the store as well!

What I think is notable about our WooCommerce installation at CodePen is how painless it was, while doing everything we need it to do. I’d say it was a half-day job with maybe a half-day of maintenance every few months, partially based on us wanting to change something.

The first step is installing the plugin, and immediately you get a Products post type you can use to add new products. We’re selling a T-Shirt, so that looks like this:

What is somewhat astounding about WooCommerce is that you might need to do very little else. You could set a price, flip on the basic PayPal integration and enter your email, publish the product, and start taking orders.

Or, you could start customizing things and do as much or as little as you want:

• You could add as many different payment processors as you like. We like using Stripe for credit card processing at CodePen, but also offer PayPal.
• You could customize the template of every different page involved, or just use the defaults. At CodePen we have very lightly customized templates for the store homepage and product page.
• You could get very detailed with calculating shipping costs, or use flat rates. We use a flat rate shipping cost at CodePen almost as marketing: same shipping cost anywhere in the world!
• You could get into integrations, like connecting it with your MailChimp account for further email marketing or Slack account to notify your team of sales.

If you can dream it, you can do it with WooCommerce.

At CodePen, we work with a company called RealThread that actually prints and ships the T-Shirts.

They work great with WooCommerce of course, and the way we set that up is that we use the ShipStation integration and blast the orders into their account there and they handle all the fulfillment from there. There are all sorts of shipping method plugins though for anything you can think of.

Within WooCommerce, we have a dashboard of all the orders, their status, and even tracking information should we need to look something up.

So essentially:

1. We use WooCommerce
2. We use the Stripe plugin to take our credit card payments that way
3. We use the PayPal plugin to take PayPal payments over Braintree
4. We use the ShipStation plugin to send orders to that system for our fulfillment company to handle

It was quite easy to set up and works great, and it’s comforting to know that we could do tons more with it if we needed to and support is there to help.

The post A Basic WooCommerce Setup to Sell T-Shirts appeared first on CSS-Tricks.

Post pobrano z: Using feature detection to write CSS with cross-browser support

In early 2017, I presented a couple of workshops on the topic of CSS feature detection, titled CSS Feature Detection in 2017.

A friend of mine, Justin Slack from New Media Labs, recently sent me a link to the phenomenal Feature Query Manager extension (available for both Chrome and Firefox), by Nigerian developer Ire Aderinokun. This seemed to be a perfect addition to my workshop material on the subject.

However, upon returning to the material, I realized how much my work on the subject has aged in the last 18 months.

The CSS landscape has undergone some tectonic shifts:

• The Atomic CSS approach, although widely hated at first, has gained some traction through libraries like Tailwind, and perhaps influenced the addition of several new utility classes to Bootstrap 4.
• CSS-in-JS exploded in popularity, with Styled Components at the forefront of the movement.
• The CSS Grid Layout spec has been adopted by browser vendors with surprising speed, and was almost immediately sanctioned as production ready.

The above prompted me to not only revisit my existing material, but also ponder the state of CSS feature detection in the upcoming 18 months.

In short:

1. ❓ Why do we need CSS feature detection at all?
2. 🛠️ What are good (and not so good) ways to do feature detection?
3. 🤖 What does the future hold for CSS feature detection?

Cross-browser compatible CSS

When working with CSS, it seems that one of the top concerns always ends up being inconsistent feature support among browsers. This means that CSS styling might look perfect on my browsers of choice, but might be completely broken on another (perhaps an even more popular) browser.

Luckily, dealing with inconsistent browser support is trivial due to a key feature in the design of the CSS language itself. This behavior, called fault tolerance, means that browsers ignore CSS code they don’t understand. This is in stark contrast to languages like JavaScript or PHP that stop all execution in order to throw an error.

The critical implication here is that if we layer our CSS accordingly, properties will only be applied if the browser understands what they mean. As an example, you can include the following CSS rule and the browser will just ignore it— overriding the initial yellow color, but ignoring the third nonsensical value:

background-color: yellow;
background-color: blue; /* Overrides yellow */
background-color: aqy8godf857wqe6igrf7i6dsgkv; /* Ignored */

To illustrate how this can be used in practice, let me start with a contrived, but straightforward situation:

A client comes to you with a strong desire to include a call-to-action (in the form of a popup) on his homepage. With your amazing front-end skills, you are able to quickly produce the most obnoxious pop-up message known to man:

Unfortunately, it turns out that his wife has an old Windows XP machine running Internet Explorer 8. You’re shocked to learn that what she sees no longer resembles a popup in any shape or form.

But! We remember that by using the magic of CSS fault tolerance, we can remedy the situation. We identify all the mission-critical parts of the styling (e.g., the shadow is nice to have, but does not add anything useful usability-wise) and buffer prepend all core styling with fallbacks.

This means that our CSS now looks something like the following (the overrides are highlighted for clarity):

.overlay {
  background: grey;
  background: rgba(0, 0, 0, 0.4);
  border: 1px solid grey;
  border: 1px solid rgba(0, 0, 0, 0.4);
  padding: 64px;
  padding: 4rem;
  display: block;
  display: flex;
  justify-content: center; /* if flex is supported */
  align-items: center; /* if flex is supported */
  height: 100%;
  width: 100%;
}

.popup {
  background: white;
  background-color: rgba(255, 255, 255, 1);
  border-radius: 8px;
  border: 1px solid grey;
  border: 1px solid rgba(0, 0, 0, 0.4);
  box-shadow: 
    0 7px 8px -4px rgba(0,0, 0, 0.2),
    0 13px 19px 2px rgba(0, 0, 0, 0.14),
    0 5px 24px 4px rgba(0, 0, 0, 0.12);
  padding: 32px;
  padding: 2rem;
  min-width: 240px;
}

button {
  background-color: #e0e1e2;
  background-color: rgba(225, 225, 225, 1);
  border-width: 0;
  border-radius: 4px;
  border-radius: 0.25rem;
  box-shadow: 
    0 1px 3px 0 rgba(0,0,0,.2), 
    0 1px 1px 0 rgba(0,0,0,.14), 
    0 2px 1px -1px rgba(0,0,0,.12);
  color: #5c5c5c;
  color: rgba(95, 95, 95, 1);
  cursor: pointer;
  font-weight: bold;
  font-weight: 700;
  padding: 16px;
  padding: 1rem;
}

button:hover {
  background-color: #c8c8c8;
  background-color: rgb(200,200,200); 
}

The above example generally falls under the broader approach of Progressive Enhancement. If you’re interested in learning more about Progressive Enhancement check out Aaron Gustafson’s second edition of his stellar book on the subject, titled Adaptive Web Design: Crafting Rich Experiences with Progressive Enhancement (2016).

If you’re new to front-end development, you might wonder how on earth does one know the support level of specific CSS properties. The short answer is that the more you work with CSS, the more you will learn these by heart. However, there are a couple of tools that are able to help us along the way:

• Can I Use is a widely used directory that contains searchable, up to date support matrices for all CSS features.
• Stylelint has a phenomenal plugin-called called No Unsupported Browser Features that gives scours errors for unsupported CSS (defined via Browserslist) either in your editor itself or via a terminal command.
• There are several tools like BrowserStack or Cross Browser Testing that allow you to remotely test your website on different browsers. Note that these are paid services, although BrowserStack has a free tier for open source projects.

Even with all the above at our disposal, learning CSS support by heart will help us plan our styling up front and increase our efficiency when writing it.

Limits of CSS fault tolerance

The next week, your client returns with a new request. He wants to gather some feedback from users on the earlier changes that were made to the homepage—again, with a pop-up:

Once again it will look as follows in Internet Explorer 8:

Being more proactive this time, you use your new fallback skills to establish a base level of styling that works on Internet Explorer 8 and progressive styling for everything else. Unfortunately, we still run into a problem…

In order to replace the default radio buttons with ASCII hearts, we use the ::before pseudo-element. However this pseudo-element is not supported in Internet Explorer 8. This means that the heart icon does not render; however the display: none property on the <input type="radio"> element still triggers on Internet Explorer 8. The implication being that neither the replacement behavior nor the default behavior is shown.

Credit to John Faulds for pointing out that it is actually possible to get the ’::before’ pseudo-element to work in Internet Explorer 8 if you replace the official double colon syntax with a single colon.

In short, we have a rule (display: none) whose execution should not be bound to its own support (and thus its own fallback structure), but to the support level of a completely separate CSS feature (::before).

For all intents and purposes, the common approach is to explore whether there are more straightforward solutions that do not rely on ::before. However, for the sake of this example, let’s say that the above solution is non-negotiable (and sometimes they are).

Enter User Agent Detection

A solution might be to determine what browser the user is using and then only apply display: none if their browser supports the ::before pseudo-element.

In fact, this approach is almost as old as the web itself. It is known as User Agent Detection or, more colloquially, browser sniffing.

It is usually done as follows:

• All browsers add a JavaScript property on the global window object called navigator and this object contains a userAgent string property.
• In my case, the userAgent string is: Mozilla/5.0 (Windows NT10.0;Win64;x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/67.0.3396.9 Safari/537.36.
• Mozilla Developer Network has a comprehensive list of how the above can be used to determine the browser.
• If we are using Chrome, then the following should return true: (navigator.userAgent.indexOf("chrome") !== -1).
• However, under the Internet Explorer section on MDN, we just get Internet Explorer. IE doesn’t put its name in the BrowserName/VersionNumber format.
• Luckily, Internet Explorer provides its own native detection in the form of Conditional Comments.

This means that adding the following in our HTML should suffice:

<!--[if lt IE 9]>
  <style>
    input {
      display: block;
    }
  </style>
<![endif]-->

This means that the above will be applied, should the browser be a version of Internet Explorer lower than version 9 (IE 9 supports ::before)—effectively overriding the display: none property.
Seems straightforward enough?

Unfortunately, over time, some critical flaws emerged in User Agent Detection. So much so that Internet Explorer stopped supporting Conditional Comments from version 10 onward. You will also notice that in the Mozilla Developer Network link itself, the following is presented in an orange alert:

It’s worth re-iterating: it’s very rarely a good idea to use user agent sniffing. You can almost always find a better, more broadly compatible way to solve your problem!

The biggest drawback of User Agent Detection is that browser vendors started spoofing their user agent strings over time due to the following:

• Developer adds CSS feature that is not supported in the browser.
• Developer adds User Agent Detection code to serve fallbacks to the browser.
• Browser eventually adds support for that specific CSS feature.
• Original User Agent Detection code is not updated to take this into consideration.
• Code always displays the fallback, even if the browser now supports the CSS feature.
• Browser uses a fake user agent string to give users the best experience on the web.

Furthermore, even if we were able to infallibly determine every browser type and version, we would have to actively maintain and update our User Agent Detection to reflect the feature support state of those browsers (notwithstanding browsers that have not even been developed yet).

It is important to note that although there are superficial similarities between feature detection and User Agent Detection, feature detection takes a radically different approach than User Agent Detection. According to the Mozilla Developer Network, when we use feature detection, we are essentially doing the following:

1. 🔎 Testing whether a browser is actually able to run a specific line (or lines) of HTML, CSS or JavaScript code.
2. 💪 Taking a specific action based on the outcome of this test.

We can also look to Wikipedia for a more formal definition (emphasis mine):

Feature detection (also feature testing) is a technique used in web development for handling differences between runtime environments (typically web browsers or user agents), by programmatically testing for clues that the environment may or may not offer certain functionality. This information is then used to make the application adapt in some way to suit the environment: to make use of certain APIs, or tailor for a better user experience.

While a bit esoteric, this definition does highlight two important aspects of feature detection:

• Feature detection is a technique, as opposed to a specific tool or technology. This means that there are various (equally valid) ways to accomplish feature detection.
• Feature detection programmatically tests code. This means that browsers actually run a piece of code to see what happens, as opposed to merely using inference or comparing it against a theoretical reference/list as done with User Agent Detection.

CSS feature detection with @supports

The core concept is not to ask „What browser is this?” It’s to ask „Does your browser support the feature I want to use?”.

—Rob Larson, The Uncertain Web: Web Development in a Changing Landscape (2014)

Most modern browsers support a set of native CSS rules called CSS conditional rules. These allow us to test for certain conditions within the stylesheet itself. The latest iteration (known as module level 3) is described by the Cascading Style Sheets Working Group as follows:

This module contains the features of CSS for conditional processing of parts of style sheets, conditioned on capabilities of the processor or the document the style sheet is being applied to. It includes and extends the functionality of CSS level 2 [CSS21], which builds on CSS level 1 [CSS1]. The main extensions compared to level 2 are allowing nesting of certain at-rules inside ‘@media’, and the addition of the ‘@supports’ rule for conditional processing.

If you’ve used @media, @document or @import before, then you already have experience working with CSS conditional rules. For example when using CSS media queries we do the following:

• Wrap a single or multiple CSS declarations in a code block with curly brackets, { }.
• Prepend the code block with a @media query with additional information.
• Include an optional media type. This can either be all, print, speech or the commonly used screen type.
• Chain expressions with and/or to determine the scope. For example, if we use (min-width: 300px) and (max-width: 800px), it will trigger the query if the screen size is wider than 300 pixels and smaller than 800 pixels.

The feature queries spec (editor’s draft) prescribes behavior that is conveniently similar to the above example. Instead of using a query expression to set a condition based on the screen size, we write an expression to scope our code block according to a browser’s CSS support (emphasis mine):

The ‘@supports rule allows CSS to be conditioned on implementation support for CSS properties and values. This rule makes it much easier for authors to use new CSS features and provide good fallback for implementations that do not support those features. This is particularly important for CSS features that provide new layout mechanisms, and for other cases where a set of related styles needs to be conditioned on property support.

In short, feature queries are a small built-in CSS tool that allow us to only execute code (like the display: none example above) when a browser supports a separate CSS feature—and much like media queries, we are able to chain expressions as follows: @supports (display: grid) and ((animation-name: spin) or (transition: transform(rotate(360deg)).

So, theoretically, we should be able to do the following:

@supports (::before) {
  input {
    display: none;
  }
}

Unfortunately, it seems that in our example above the display: none property did not trigger, in spite of the fact that your browser probably supports ::before.

That’s because there are some caveats to using @supports:

• First and foremost, CSS feature queries only support CSS properties and not CSS pseudo-element, like ::before.
• Secondly, you will see that in the above example our @supports (transform: scale(2)) and (animation-name: beat) condition fires correctly. However if we were to test it in Internet Explorer 11 (which supports both transform: scale(2) and animation-name: beat) it does not fire. What gives? In short, @supports is a CSS feature, with a support matrix of its own.

CSS feature detection with Modernizr

Luckily, the fix is fairly easy! It comes in the form of an open source JavaScript library named Modernizr, initially developed by Faruk Ateş (although it now has some pretty big names behind it, like Paul Irish from Chrome and Alex Sexton from Stripe).

Before we dig into Modernizr, let’s address a subject of great confusion for many developers (partly due to the name „Modernizr” itself). Modernizr does not transform your code or magically enable unsupported features. In fact, the only change Modernzr makes to your code is appending specific CSS classes to your <html> tag.

This means that you might end up with something like the following:

<html class="js flexbox flexboxlegacy canvas canvastext webgl no-touch geolocation postmessage websqldatabase indexeddb hashchange history draganddrop websockets rgba hsla multiplebgs backgroundsize borderimage borderradius boxshadow textshadow opacity cssanimations csscolumns cssgradients cssreflections csstransforms csstransforms3d csstransitions fontface generatedcontent video audio localstorage sessionstorage webworkers applicationcache svg inlinesvg smil svgclippaths">

That is one big HTML tag! However, it allows us do something super powerful: use the CSS descendant selector to conditionally apply CSS rules.

When Modernizr runs, it uses JavaScript to detect what the user’s browser supports, and if it does support that feature, Modernizr injects the name of it as a class to the <html>. Alternatively, if the browser does not support the feature, it prefixes the injected class with no- (e.g., no-generatedcontent in our ::before example). This means that we can write our conditional rule in the stylesheet as follows:

.generatedcontent input {
  display: none
}

In addition, we are able to replicate the chaining of @supports expressions in Modernizr as follows:

/* default */
.generatedcontent input { }

/* 'or' operator */
.generatedcontent input, .csstransforms input { }

/* 'and' operator */
.generatedcontent.csstransformsinput { }

/* 'not' operator */
.no-generatedcontent input { }

Since Modernizr runs in JavaScript (and does not use any native browser APIs), it’s effectively supported on almost all browsers. This means that by leveraging classes like generatedcontent and csstransforms, we are able to cover all our bases for Internet Explorer 8, while still serving bleeding-edge CSS to the latest browsers.

It is important to note that since the release of Modernizr 3.0, we are no longer able to download a stock-standard modernizr.js file with everything except the kitchen sink. Instead, we have to explicitly generate our own custom Modernizr code via their wizard (to copy or download). This is most likely in response to the increasing global focus on web performance over the last couple of years. Checking for more features contributes to more loading, so Modernizr wants us to only check for what we need.

So, I should always use Modernizr?

Given that Modernizr is effectively supported across all browsers, is there any point in even using CSS feature queries? Ironically, I would not only say that we should but that feature queries should still be our first port of call.

First and foremost, the fact that Modernizr does not plug directly into the browser API is it’s greatest strength—it does not rely on the availability of a specific browser API. However, this benefit comes a cost, and that cost is additional overhead to something most browsers support out of the box through @supports—especially when you’re delivering this additional overhead to all users indiscriminately in order to a small amount of edge users. It is important to note that, in our example above, Internet Explorer 8 currently only stands at 0.18% global usage).

Compared to the light touch of @supports, Modernizr has the following drawbacks:

• The approach underpinning development of Modernizr is driven by the assumption that Modernizr was „meant from day one to eventually become unnecessary.”
• In the majority of cases, Modernizr needs to be render blocking. This means that Modernizr needs to be downloaded and executed in JavaScript before a web page can even show content on the screen—increasing our page load time (especially on mobile devices)!
• In order to run tests, Modernizr often has to actually build hidden HTML nodes and test whether it works. For example, in order to test for <canvas> support, Modernizr executes the follow JavaScript code: return !!(document.createElement('canvas').getContext && document.createElement('canvas').getContext('2d'));. This consumes CPU processing power that could be used elsewhere.
• The CSS descendant selector pattern used by Modernizr increases CSS specificity. (See Harry Roberts’ excellent article on why „specificity is a trait best avoided.”)
• Although Modernizr covers a lot of tests (150+), it still does not cover the entire spectrum of CSS properties like @support does. The Modernizr team actively maintains a list of these undetectables.

Given that feature queries have already been widely implemented across the browser landscape, (covering about 93.42% of global browsers at the time of writing), it’s been a good while since I’ve used Modernizr. However, it is good to know that it exists as an option should we run into the limitations of @supports or if we need to support users still locked into older browsers or devices for a variety of potential reasons.

Furthermore, when using Modernizr, it is usually in conjunction with @supports as follows:

.generatedcontent input {
  display: none;
}

label:hover::before {
  color: #c6c8c9;
}

input:checked + label::before {
  color: black;
}

@supports (transform: scale(2)) and (animation-name: beat) {
  input:checked + label::before {
    color: #e0e1e2;
    animation-name: beat;
    animation-iteration-count: infinite;
    animation-direction: alternate;
  }
}

This triggers the following to happen:

• If ::before is not supported, our CSS will fallback to the default HTML radio select.
• If neither transform(scale(2)) nor animation-name: beat are supported but ::before is, then the heart icon will change to black instead of animate when selected.
• If transform(scale(2), animation-name: beat and ::before are supported, then the heart icon will animate when selected.

The future of CSS feature detection

Up until this point, I’ve shied away from talking about feature detection in a world being eaten by JavaScript, or possibly even a post-JavaScript world. Perhaps even intentionally so, since current iterations at the intersection between CSS and JavaScript are extremely contentious and divisive.

From that moment on, the web community was split in two by an intense debate between those who see CSS as an untouchable layer in the „separation of concerns” paradigm (content + presentation + behaviour, HTML + CSS + JS) and those who have simply ignored this golden rule and found different ways to style the UI, typically applying CSS styles via JavaScript. This debate has become more and more intense every day, bringing division in a community that used to be immune to this kind of „religion wars”.

—Cristiano Rastelli, Let there be peace on CSS (2017)

However, I think exploring how to apply feature detection in the modern CSS-in-JS toolchain might be of value as follows:

• It provides an opportunity to explore how CSS feature detection would work in a radically different environment.
• It showcases feature detection as a technique, as opposed to a specific technology or tool.

With this in mind, let us start by examining an implementation of our pop-up by means of the most widely-used CSS-in-JS library (at least at the time of writing), Styled Components:

This is how it will look in Internet Explorer 8:

In our previous examples, we’ve been able to conditionally execute CSS rules based on the browser support of ::before (via Modernizr) and transform (via @supports). However, by leveraging JavaScript, we are able to take this even further. Since both @supports and Modernizr expose their APIs via JavaScript, we are able to conditionally load entire parts of our pop-up based solely on browser support.

Keep in mind that you will probably need to do a lot of heavy lifting to get React and Styled Components working in a browser that does not even support ::before (checking for display: grid might make more sense in this context), but for the sake of keeping with the above examples, let us assume that we have React and Styled Components running in Internet Explorer 8 or lower.

In the example above, you will notice that we’ve created a component, called ValueSelection. This component returns a clickable button that increments the amount of likes on click. If you are viewing the example on a slightly older browser, you might notice that instead of the button you will see a dropdown with values from 0 to 9.

In order to achieve this, we’re conditionally returning an enhanced version of the component only if the following conditions are met:

if (
  CSS.supports('transform: scale(2)') &&
  CSS.supports('animation-name: beat') &&
  Modernizr.generatedcontent
) {
  return (
    <React.Fragment>
      <Modern type="button" onClick={add}>{string}</Modern> 
      <input type="hidden" name="liked" value={value} />
    </React.Fragment>
  )
}

return (
  <Base value={value} onChange={select}>
    {
      [1,2,3,4,5,6,7,8,9].map(val => (
        <option value={val} key={val}>{val}</option>
      ))
    }
  </Base>
);

What is intriguing about this approach is that the ValueSelection component only exposes two parameters:

• The current amount of likes
• The function to run when the amount of likes are updated

<Overlay>
  <Popup>
    <Title>How much do you like popups?</Title>
    <form>
      <ValueInterface value={liked} change={changeLike} />
      <Button type="submit">Submit</Button>
    </form>
  </Popup>
</Overlay>

In other words, the component’s logic is completely separate from its presentation. The component itself will internally decide what presentation works best given a browser’s support matrix. Having the conditional presentation abstracted away inside the component itself opens the door to exciting new ways of building cross-browser compatible interfaces when working in a front-end and/or design team.

Here’s the final product:

…and how it should theoretically look in Internet Explorer 8:

Additional Resources

If you are interested in diving deeper into the above you can visit the following resources:

• Mozilla Developer Network article on feature detection
• Mozilla Developer Network article on user agent detection
• Mozilla Developer Network article on CSS feature queries
• Official feature queries documentation by the CSSWG
• Modernizr Documentation

---

Schalk is a South African front-end developer/designer passionate about the role technology and the web can play as a force for good in his home country. He works full time with a group of civic tech minded developers at a South African non-profit called OpenUp.

He also helps manage a collaborative space called Codebridge where developers are encouraged to come and experiment with technology as a tool to bridge social divides and solve problems alongside local communities.

The post Using feature detection to write CSS with cross-browser support appeared first on CSS-Tricks.