Wszystkie wpisy, których autorem jest admin

Top 5 Ways for Beginners to Capture Amazing and Professional-Looking Photos

Post pobrano z: Top 5 Ways for Beginners to Capture Amazing and Professional-Looking Photos

Beginners are often frustrated when they
first get into photography. Most want to capture the types of photos that they
see in magazine spreads, but that requires skill and experience.

The good news is that there are ways that
even beginners can capture photos that are more professional-looking and stand
out:

Learn how to hold the camera still

If you want your
photos to look good you need to keep your camera still. That is not as easy as
it sounds, but as a start you could grip the camera with both hands and support
your elbows on the side of your body.

Eventually, you can try holding the camera in different positions while supporting it as best you can. On top of that, a good shortcut to make sure the camera is still is to use a tripod stand.

Use the rule of thirds

Over time you’ll
want to learn as much about composition as you can – but a good place to start
is with the rule of thirds. To use it
you just need to turn on the grid on your camera, then frame your shot using
its lines and intersection points as a guide.

By using this
technique, your subject will be positioned slightly off-center – with a focal
point at one of the intersection points. On top of that the other elements in
the composition should be more balanced if you align them using the other
gridlines.

Make sure the lighting is good

For your photos
to look good there needs to be plenty of light, and ideally it should be soft
and diffused. Natural light (i.e. sunlight) coming in through a large open
window will normally suffice when you first start out.

If you want you
can look into using lighting kits and softboxes to improve your lighting when
indoors. For capturing photos outdoors it may be a good idea to try shooting during the golden hour as the
lighting conditions are normally excellent.

Explore your camera’s settings

Try to make it a
point to slowly but surely explore the various settings on your camera.
Initially you could try out its different shooting modes, but eventually you
should aim to experiment with its manual settings.

The better you
know the settings on your camera, the more control you’ll have over how it
exposes your photos – which will invariably let you snap far more amazing
shots.

Try framing subjects from different angles

When you’re
shooting a subject, try not to stand directly in front of them and at
eye-level. That is the most common perspective that is used for shots, and it
tends to look a bit mundane.

Instead of that
you should experiment with different angles and distances. The more you mix it
up and get creative, the more unique your photos will look. For example you
could snap photos from ground level, or from overhead, or you could get up
close and fill the entire frame with the subject.

Aside from improving your photography technique, you should also look into learning how to edit your photos. It will provide you the opportunity to make lots of great improvements that really bring out the best in your photos. In fact, even something as simple as applying a black and white filter could transform the look and feel of your photos completely.

If you follow everything described above, you will find that your photography begins to improve by leaps and bounds. From there it is really just a question of continuing to practice your technique to hone it, and trying to experiment and pick up new skills to expand your horizons.

Featured image by Loic Leray

Top 5 Ways for Beginners to Capture Amazing and Professional-Looking Photos

Post pobrano z: Top 5 Ways for Beginners to Capture Amazing and Professional-Looking Photos

Beginners are often frustrated when they
first get into photography. Most want to capture the types of photos that they
see in magazine spreads, but that requires skill and experience.

The good news is that there are ways that
even beginners can capture photos that are more professional-looking and stand
out:

Learn how to hold the camera still

If you want your
photos to look good you need to keep your camera still. That is not as easy as
it sounds, but as a start you could grip the camera with both hands and support
your elbows on the side of your body.

Eventually, you can try holding the camera in different positions while supporting it as best you can. On top of that, a good shortcut to make sure the camera is still is to use a tripod stand.

Use the rule of thirds

Over time you’ll
want to learn as much about composition as you can – but a good place to start
is with the rule of thirds. To use it
you just need to turn on the grid on your camera, then frame your shot using
its lines and intersection points as a guide.

By using this
technique, your subject will be positioned slightly off-center – with a focal
point at one of the intersection points. On top of that the other elements in
the composition should be more balanced if you align them using the other
gridlines.

Make sure the lighting is good

For your photos
to look good there needs to be plenty of light, and ideally it should be soft
and diffused. Natural light (i.e. sunlight) coming in through a large open
window will normally suffice when you first start out.

If you want you
can look into using lighting kits and softboxes to improve your lighting when
indoors. For capturing photos outdoors it may be a good idea to try shooting during the golden hour as the
lighting conditions are normally excellent.

Explore your camera’s settings

Try to make it a
point to slowly but surely explore the various settings on your camera.
Initially you could try out its different shooting modes, but eventually you
should aim to experiment with its manual settings.

The better you
know the settings on your camera, the more control you’ll have over how it
exposes your photos – which will invariably let you snap far more amazing
shots.

Try framing subjects from different angles

When you’re
shooting a subject, try not to stand directly in front of them and at
eye-level. That is the most common perspective that is used for shots, and it
tends to look a bit mundane.

Instead of that
you should experiment with different angles and distances. The more you mix it
up and get creative, the more unique your photos will look. For example you
could snap photos from ground level, or from overhead, or you could get up
close and fill the entire frame with the subject.

Aside from improving your photography technique, you should also look into learning how to edit your photos. It will provide you the opportunity to make lots of great improvements that really bring out the best in your photos. In fact, even something as simple as applying a black and white filter could transform the look and feel of your photos completely.

If you follow everything described above, you will find that your photography begins to improve by leaps and bounds. From there it is really just a question of continuing to practice your technique to hone it, and trying to experiment and pick up new skills to expand your horizons.

Featured image by Loic Leray

Fondation Émergence: Pride Shield

Post pobrano z: Fondation Émergence: Pride Shield
Media, Outdoor, PR
Fondation Emergence

Homophobic violence is on the rise. And for the International Day Against Homophobia and Transphobia, we aimed to show the importance of unity in the face of LGBTQ+ violence and the hope to stop it. 

We conducted and filmed a ballistic experiment and fired a .45 caliber bullet on 193 Pride Flags (one for each country registered in the UN) aligned on metal wires spanning on 200 metres. A single flag would have stood no chance against the bullet. But with each flag, the bullet lost power, eventually stopping in its tracks. The Pride Shield – the only Pride Flag designed to stop violence was born. 

The ballistic experiment became our hero video content piece and the flags that withstood the impact were turned into a traveling art piece symbolizing the importance of standing together in the face of violence.

As we convince ourselves that the world is a more tolerant and accepting place, 72 countries criminalize same-sex relationships, 8 of which impose the death penalty.

May 17th is the International Day Against Homophobia and Transphobia and our objective was to help trigger discussions about the LGBTQ+’s community harsh realities. We needed to catch the attention of the widest audience possible in a time when some people might think that being a LGBTQ+ individual is no longer frowned upon.

Knowing that people tend to shut off when confronted with depictions of violence, we aimed at symbolizing the problem and the solution in an evocative, universal allegory.

Advertising Agency:Rethink, Montréal, Canada
Creative Director:Nicolas Quintal, Chris Staples, Ian Grais
Art Director:Maxime Sauté
Writer:Xavier Blais, Greg Kieltyka
Broadcast Producer:Marie-Noëlle Rosso
Strategist:Pascal Routhier
Account Director:Alex Lefebvre
Web Developer:Steve Lam
Digital Producer:Todd Harrison
Director:Julien Hurteau
Director Of Photography:Mathieu Élie
Colour Grading:Simon Boissonneau
Producer:Alexandre Caron, Jean-René Parenteau
Post Production Coordinator:Gabrielle Doré
Sound Engineer:P.O. Rioux
Flag installation:Nicolas Bélanger
Print Producer:Martine Goyette, Geneviève Croteau
Photographer:John Londono
Assistant Photographer:Philippe Richelet
Image Retouching:Valérie Laliberté, Béatrice Munn

Fondation Émergence: Pride Shield

Post pobrano z: Fondation Émergence: Pride Shield
Media, Outdoor, PR
Fondation Emergence

Homophobic violence is on the rise. And for the International Day Against Homophobia and Transphobia, we aimed to show the importance of unity in the face of LGBTQ+ violence and the hope to stop it. 

We conducted and filmed a ballistic experiment and fired a .45 caliber bullet on 193 Pride Flags (one for each country registered in the UN) aligned on metal wires spanning on 200 metres. A single flag would have stood no chance against the bullet. But with each flag, the bullet lost power, eventually stopping in its tracks. The Pride Shield – the only Pride Flag designed to stop violence was born. 

The ballistic experiment became our hero video content piece and the flags that withstood the impact were turned into a traveling art piece symbolizing the importance of standing together in the face of violence.

As we convince ourselves that the world is a more tolerant and accepting place, 72 countries criminalize same-sex relationships, 8 of which impose the death penalty.

May 17th is the International Day Against Homophobia and Transphobia and our objective was to help trigger discussions about the LGBTQ+’s community harsh realities. We needed to catch the attention of the widest audience possible in a time when some people might think that being a LGBTQ+ individual is no longer frowned upon.

Knowing that people tend to shut off when confronted with depictions of violence, we aimed at symbolizing the problem and the solution in an evocative, universal allegory.

Advertising Agency:Rethink, Montréal, Canada
Creative Director:Nicolas Quintal, Chris Staples, Ian Grais
Art Director:Maxime Sauté
Writer:Xavier Blais, Greg Kieltyka
Broadcast Producer:Marie-Noëlle Rosso
Strategist:Pascal Routhier
Account Director:Alex Lefebvre
Web Developer:Steve Lam
Digital Producer:Todd Harrison
Director:Julien Hurteau
Director Of Photography:Mathieu Élie
Colour Grading:Simon Boissonneau
Producer:Alexandre Caron, Jean-René Parenteau
Post Production Coordinator:Gabrielle Doré
Sound Engineer:P.O. Rioux
Flag installation:Nicolas Bélanger
Print Producer:Martine Goyette, Geneviève Croteau
Photographer:John Londono
Assistant Photographer:Philippe Richelet
Image Retouching:Valérie Laliberté, Béatrice Munn

Fondation Émergence: Pride Shield

Post pobrano z: Fondation Émergence: Pride Shield
Media, Outdoor, PR
Fondation Emergence

Homophobic violence is on the rise. And for the International Day Against Homophobia and Transphobia, we aimed to show the importance of unity in the face of LGBTQ+ violence and the hope to stop it. 

We conducted and filmed a ballistic experiment and fired a .45 caliber bullet on 193 Pride Flags (one for each country registered in the UN) aligned on metal wires spanning on 200 metres. A single flag would have stood no chance against the bullet. But with each flag, the bullet lost power, eventually stopping in its tracks. The Pride Shield – the only Pride Flag designed to stop violence was born. 

The ballistic experiment became our hero video content piece and the flags that withstood the impact were turned into a traveling art piece symbolizing the importance of standing together in the face of violence.

As we convince ourselves that the world is a more tolerant and accepting place, 72 countries criminalize same-sex relationships, 8 of which impose the death penalty.

May 17th is the International Day Against Homophobia and Transphobia and our objective was to help trigger discussions about the LGBTQ+’s community harsh realities. We needed to catch the attention of the widest audience possible in a time when some people might think that being a LGBTQ+ individual is no longer frowned upon.

Knowing that people tend to shut off when confronted with depictions of violence, we aimed at symbolizing the problem and the solution in an evocative, universal allegory.

Advertising Agency:Rethink, Montréal, Canada
Creative Director:Nicolas Quintal, Chris Staples, Ian Grais
Art Director:Maxime Sauté
Writer:Xavier Blais, Greg Kieltyka
Broadcast Producer:Marie-Noëlle Rosso
Strategist:Pascal Routhier
Account Director:Alex Lefebvre
Web Developer:Steve Lam
Digital Producer:Todd Harrison
Director:Julien Hurteau
Director Of Photography:Mathieu Élie
Colour Grading:Simon Boissonneau
Producer:Alexandre Caron, Jean-René Parenteau
Post Production Coordinator:Gabrielle Doré
Sound Engineer:P.O. Rioux
Flag installation:Nicolas Bélanger
Print Producer:Martine Goyette, Geneviève Croteau
Photographer:John Londono
Assistant Photographer:Philippe Richelet
Image Retouching:Valérie Laliberté, Béatrice Munn

Fondation Émergence: Pride Shield

Post pobrano z: Fondation Émergence: Pride Shield
Media, Outdoor, PR
Fondation Emergence

Homophobic violence is on the rise. And for the International Day Against Homophobia and Transphobia, we aimed to show the importance of unity in the face of LGBTQ+ violence and the hope to stop it. 

We conducted and filmed a ballistic experiment and fired a .45 caliber bullet on 193 Pride Flags (one for each country registered in the UN) aligned on metal wires spanning on 200 metres. A single flag would have stood no chance against the bullet. But with each flag, the bullet lost power, eventually stopping in its tracks. The Pride Shield – the only Pride Flag designed to stop violence was born. 

The ballistic experiment became our hero video content piece and the flags that withstood the impact were turned into a traveling art piece symbolizing the importance of standing together in the face of violence.

As we convince ourselves that the world is a more tolerant and accepting place, 72 countries criminalize same-sex relationships, 8 of which impose the death penalty.

May 17th is the International Day Against Homophobia and Transphobia and our objective was to help trigger discussions about the LGBTQ+’s community harsh realities. We needed to catch the attention of the widest audience possible in a time when some people might think that being a LGBTQ+ individual is no longer frowned upon.

Knowing that people tend to shut off when confronted with depictions of violence, we aimed at symbolizing the problem and the solution in an evocative, universal allegory.

Advertising Agency:Rethink, Montréal, Canada
Creative Director:Nicolas Quintal, Chris Staples, Ian Grais
Art Director:Maxime Sauté
Writer:Xavier Blais, Greg Kieltyka
Broadcast Producer:Marie-Noëlle Rosso
Strategist:Pascal Routhier
Account Director:Alex Lefebvre
Web Developer:Steve Lam
Digital Producer:Todd Harrison
Director:Julien Hurteau
Director Of Photography:Mathieu Élie
Colour Grading:Simon Boissonneau
Producer:Alexandre Caron, Jean-René Parenteau
Post Production Coordinator:Gabrielle Doré
Sound Engineer:P.O. Rioux
Flag installation:Nicolas Bélanger
Print Producer:Martine Goyette, Geneviève Croteau
Photographer:John Londono
Assistant Photographer:Philippe Richelet
Image Retouching:Valérie Laliberté, Béatrice Munn

Hightype: a Type Foundry that Exclusively Creates Three-dimensional Type

Post pobrano z: Hightype: a Type Foundry that Exclusively Creates Three-dimensional Type

Based in Berlin, Germany, Hightype is a type foundry that specializes in the creation 3D typefaces. Founded by Manuel Rossner, it was launched recently and promises to bring good type to VR, interaction design, games, 3D printing, and branding.

To use Hightype’s fonts, you will need to be familiar with 3D software and technologies (obviously). The typefaces are provided in .fbx, .3ds and .obj-format. As 3D typography is still a developing field, some traditional type features like kerning are not yet available.

As Hightype is a very recent type foundry, they have only one font for sale on their website at the moment: HT Standard. The font is a set of 76 characters modelled in 3D. It is the right choice for creating type animations and all kinds of modifications.

The German foundry is also working on a new typeface: Katana. The only image released for the moment looks promising, so we are excited to see more characters.

Hightype also provides service-based work and can create a custom 3D font for any project you may have. For that, just contact them from the website.

Thanks for being a subscriber, here is your FREE house vector icons set.

Hightype: a Type Foundry that Exclusively Creates Three-dimensional Type

Post pobrano z: Hightype: a Type Foundry that Exclusively Creates Three-dimensional Type

Based in Berlin, Germany, Hightype is a type foundry that specializes in the creation 3D typefaces. Founded by Manuel Rossner, it was launched recently and promises to bring good type to VR, interaction design, games, 3D printing, and branding.

To use Hightype’s fonts, you will need to be familiar with 3D software and technologies (obviously). The typefaces are provided in .fbx, .3ds and .obj-format. As 3D typography is still a developing field, some traditional type features like kerning are not yet available.

As Hightype is a very recent type foundry, they have only one font for sale on their website at the moment: HT Standard. The font is a set of 76 characters modelled in 3D. It is the right choice for creating type animations and all kinds of modifications.

The German foundry is also working on a new typeface: Katana. The only image released for the moment looks promising, so we are excited to see more characters.

Hightype also provides service-based work and can create a custom 3D font for any project you may have. For that, just contact them from the website.

Thanks for being a subscriber, here is your FREE house vector icons set.

Hightype: a Type Foundry that Exclusively Creates Three-dimensional Type

Post pobrano z: Hightype: a Type Foundry that Exclusively Creates Three-dimensional Type

Based in Berlin, Germany, Hightype is a type foundry that specializes in the creation 3D typefaces. Founded by Manuel Rossner, it was launched recently and promises to bring good type to VR, interaction design, games, 3D printing, and branding.

To use Hightype’s fonts, you will need to be familiar with 3D software and technologies (obviously). The typefaces are provided in .fbx, .3ds and .obj-format. As 3D typography is still a developing field, some traditional type features like kerning are not yet available.

As Hightype is a very recent type foundry, they have only one font for sale on their website at the moment: HT Standard. The font is a set of 76 characters modelled in 3D. It is the right choice for creating type animations and all kinds of modifications.

The German foundry is also working on a new typeface: Katana. The only image released for the moment looks promising, so we are excited to see more characters.

Hightype also provides service-based work and can create a custom 3D font for any project you may have. For that, just contact them from the website.

Thanks for being a subscriber, here is your FREE house vector icons set.

Surge Send: Large Files Sharing Made for Designers

Post pobrano z: Surge Send: Large Files Sharing Made for Designers

As designers, we are bound to work with large files. If you work with Photoshop and create a bit complex compositions, it’s very possible to create files that are over 1 GB. When working with clients, it can be difficult to send these files.

Surge Send solves this problem in a brilliant way. The platform makes file transfer easy, fast, instant, and secure. It was designed specifically for the needs of creative people, such as photographers, designers, or architects.

No matter where you are and the quality of your internet connect, Surge Send lets you send your designs, photographs, videos, or pretty much anything, without a problem. The interface is extremely user-friendly, with several great features you should check out.

How Surge Send Works

The best proof that Surge Send is easy to use is the image below and the fact it takes only a small paragraph to describe how to use it. Drag-and-drop your files, enter your email ID, and click on a button to send. It’s just as easy as that!

Pause Uploads for a Better Workflow

Stop worrying about your internet connection or upload failure in general. Surge Send gives you the chance to pause your upload at any time and resumes once your connectivity is back to normal. This is especially useful when you are in the middle of a 30 GB file upload and Skype starts ringing. In that case, all you need to do it to pause the upload in a matter of seconds, then you can pick up your call.

Track Downloads for Peace of Mind

If you track whether your emails have been opened or not, you already know how useful it is to be notified of the reception of information you send. With Surge Send, you can do the same with the files you send, thanks to an ingenuous alert system that will email you every time a file is downloaded by a recipient.

A Highly-secured Service

All files sent with Surge Send are encrypted with 256-bit federal level encryption. If that’s not enough for you, you can add a password for it to make sure that only the people with the code will be able to download it. With Surge Send, security is not optional, but it’s a core feature.

Transfer Files on the Go

This feature is something I could have used so often. Do you need to go out in the middle of a file upload? Just pause it and switch to a new device, then you can resume the upload from the new device, not need to lose the precious minutes already spent on that upload.

Share your Files Publicly with Surge Access

As a designer, you can be interested in have a reliable way to share large files for public download. For example, if you create a great resource that is packed in a 6 GB zipped folder, you will want to share it elsewhere than on your own web server (if you have one).

To do so, you just need to upload your files to Surge Send and choose the public option. You will then be able to obtain a share link that you can send in any way you want. Of course, you can always choose to keep your download links private.

Super Surge Will Ensure Faster and Guaranteed Downloads

If downloads of very large files are failing, you can turn on Super Surge, an option that uses the power of P2P to guarantee fast delivery.

Go Pro for an Even Better Experience!

Although Surge Send is already an excellent service with the free plan, it’s possible to make it even better by going premium with Surge Pro. Thanks to the team at Surge Pro, Designer Daily’s readers can get one month free by signing up using this link.

This way, you will enjoy more space for your uploads, the ability to send larger files, the possibility to keep files indefinitely, access to transfers history, or the possibility to schedule the expiry date of link, among other things.

Thanks for being a subscriber, here is your FREE house vector icons set.